Repair laser handle stack 7 bars micro channel bar for XSD laser hair removal machine
7bars micro channel bar for XSD laser hair removal machine:
7bars micro channel bar for XSD laser hair removal machine Description:
This diode laser stack VS-MI-XSD-700 is for relacement of micro channel diode laser stack of 7bars for laser epilator XSD. The original diode is from Nlight diode stack and we will make the same for diode laser bar replacement. There are two kind of replacement ways, you can send back to China factory to do replacement or you can buy a new stack to assembly in your side.But you should have confirmed the dimension before your order like the screw holes and the water way.
7bars micro channel bar for XSD laser hair removal machine Advantages:
>Save Money. Replace the broken diode stack bar only. Low cost and convenient
>Long lifetime. we use diode laser bars from Nlight the same. The newest Ausn mounting technology will be applied when assembly. After replacement. The handpiece will be as a new one. lifetime is much longer than before
>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.
7bars micro channel bar for XSD laser hair removal machine Specifications:
| Model No. | VS-MI-XSD-700 |
| Application | laser hair removal handpiece Repair And Replacement |
| Operation Mode | CW |
| Power per submounts | 100W |
| Number of submounts in one stack | 7 bars |
| Central wavelength at 25℃ | 808 ± 5nm |
| Typical Operation current | 50A |
| Maximum Operating current | 90A |
| Typical Threshold current | 8A |
| Maximum Operating Voltage | <14 V |
| Fast Axis Divergence (FWHM) | 39º |
| Slow Axis Divergence (FWHM) | 8º |
| Operation Condition | non-condensing atmosphere, cleaning room |
| Expected lifetime | 10- 20 millions shots |
| Typical pitch per bar | 2mm |
| Cooling requirement | |
| Flow rate | >2.1L/min |
| Water Temperature | 27+-3°C |
| Water Quality | pure water |
| cooling system | Do not use any material that combination with copper would form galvanic elements |
7bars micro channel bar for XSD laser hair removal machine Dimension Scheme:
Any more questions please kindly contact kelly lasers whatsapp 0086-13522789042
